What you get
The 8800 polo, pressed. Almost every polo order is a left chest logo, and that is what this is built around.
What to send
Left chest: 3.5 to 4 inches wide at 300 DPI. Send it clean — at that size every soft edge shows, and a logo that was drawn for a website header usually is not sharp enough. We check before we press.
Worth knowing
A polo has a placket, a collar seam and a button. The print has to clear all three, which puts the usable area further out and higher than people expect. We place it where it reads on a body, not where it centres on a table.
How to press it
| Temperature | 285–305 °F (140–150 °C) |
|---|
| Pressure | Medium — 60–70 PSI |
|---|
| Cold peel | 12 seconds, then let it cool 15–20 minutes before peeling. |
|---|
| Hot peel | 6 seconds, peel straight away, then a second press of 6 seconds. |
|---|
| Second press | Parchment or Teflon over the design, 6 seconds. This is where the matte finish comes from. |
|---|
| All fabrics | One set of settings covers cotton, polyester, blends and canvas. |
|---|
Pre-press the blank first — it flattens the fabric and drives out moisture, and skipping it is the most common cause of a transfer that fails one shirt in ten. Full guide and troubleshooting table.
What to send
- PNG on a transparent background, 300 DPI at print size. PDF, TIFF and SVG also work. Not JPG — it has no transparency and the white box around your design would print.
- Send it the way it should read. Mirroring happens in our print software; do it as well and it prints backwards.
- sRGB. Opaque colour where you want colour, transparent where you want the garment to show.
- No hairline strokes. Judge line weight at final print size: thin lines print, then do not survive pressing and washing.
- A quarter inch between pieces on a gang sheet, half an inch from the edge. No crop or registration marks — they just print.
Every file is looked at before it prints. If something will disappoint you, we email before pressing print, not after. The full artwork guide.
Turnaround and delivery
Orders with clean artwork placed on a business day print that day and go out the same afternoon.
| Chicago & collar counties | Same metro as the press — the shortest leg we run |
|---|
| Illinois, Wisconsin, Indiana, Michigan | A single ground leg from Schaumburg |
|---|
| Ohio and the near Midwest | Past the first ring, still Midwest ground |
|---|
| Rest of the lower 48 | Cross-country ground |
|---|
| Cost | Free over $100, flat $4.90 below it |
|---|
We do not publish day counts — the print is ours to promise, the truck is not. Your tracking email carries the carrier's own estimate for your address. Sheets up to 24 inches ship flat between boards; longer sheets are rolled face-in and boxed. Nothing is folded. What each ground leg looks like.
If it comes out wrong
We reprint it. Print defects, the wrong size or quantity against the order, transit damage and lost parcels are all ours — reprinted on the press the same day we agree it, shipped free. Prefer the money back? Say so and it is refunded, tax and shipping included.
What we do not cover: change of mind, a file that printed exactly as sent, and pressing problems from the wrong temperature, time or a warm peel. We will help diagnose those, and if a whole batch fails with correct settings we treat it as a print defect.
Custom-printed to your file, so it is not returnable for change of mind — that is the standard position on made-to-order goods, and it is why we check every file before printing.
Report within 7 days with photographs. Full policy.
