Same family as the retro arch, lighter on its feet. The letters are outlined rather than filled heavy, so there is less ink on the garment and the print sits softer on a thin tee or a women’s cut. The three red stars stay.
Pairs well with the heavier arch as a two-piece line: heavy for the sweatshirt, this one for the tee, both clearly from the same shop.
Because the strokes are thinner, keep it at six inches or wider so the outline holds cleanly through the wash.
How to press it
| Temperature | 300–315 °F (150–157 °C) |
|---|
| Time | 12–15 seconds, medium-firm pressure |
|---|
| Peel | Cold. Wait until the film is cool to the touch, then peel low and steady. |
|---|
| Second press | Parchment or Teflon over the design, 5–8 seconds. This is where the matte finish comes from. |
|---|
| 100% polyester | 270–285 °F for 15–20 seconds, to avoid scorch and dye migration. |
|---|
Pre-press the blank for 5 seconds first — it flattens the fabric and drives out moisture, and skipping it is the most common cause of a transfer that fails one shirt in ten. Full guide and troubleshooting table.
Turnaround and delivery
Orders with clean artwork placed on a business day print that day and go out the same afternoon.
| Chicago & collar counties | 1 business day |
|---|
| Illinois, Wisconsin, Indiana, Michigan | 1–2 business days |
|---|
| Ohio and the near Midwest | 2 business days |
|---|
| Rest of the lower 48 | 3–5 business days |
|---|
| Cost | Free over $50, flat $4.90 below it |
|---|
Sheets up to 24 inches ship flat between boards; longer sheets are rolled face-in and boxed. Nothing is folded. Full transit table.
If it comes out wrong
We reprint it. Print defects, the wrong size or quantity against the order, transit damage and lost parcels are all ours — reprinted on the press the same day we agree it, shipped free. Prefer the money back? Say so and it is refunded, tax and shipping included.
What we do not cover: change of mind, a file that printed exactly as sent, and pressing problems from the wrong temperature, time or a warm peel. We will help diagnose those, and if a whole batch fails with correct settings we treat it as a print defect.
Report within 7 days with photographs. Full policy.